2517 results for simpson sds

Simpson Strong-Tie THD50600HMG - Titen Head MG 1/2 x 6 Mechanical Anchor 80 Pk

The Titen HD threaded rod hanger is a high-strength screw anchor designed to suspend threaded rod from concrete slabs, beams or concrete over metal in order to hang pipes, cable trays and other...

Simpson Strong-Tie THD50800HMG - Titen Head MG 1/2 x 8 Mechanical Anchor 40 Pk

The Titen HD threaded rod hanger is a high-strength screw anchor designed to suspend threaded rod from concrete slabs, beams or concrete over metal in order to hang pipes, cable trays and other...

Simpson Strong-Tie BIT2SU-RC10 #2 Undersized Square Drive Bit 100Pk

It is necessary to use the right driver bit to ensure optimum results with a Quik Drive system. The bit(s) included in each box of Quik Drive screws should be sufficient to drive the entire box;...

Simpson Strong-Tie A66 5-7/8 x 5-7/8-Inch Angle 25 Pk

Our line of angles provides a way to make a wide range of 90° connections. Material A21 and A23 — 18 ga.; all other A angles—12 ga. Finish Galvanized. Please Note:...

Simpson Strong-Tie ZN25300SS 1/4 x 3-Inch Zinc NailonSS Mushroom Anchor 400 Pk

Zinc Nailon anchors are low-cost, easy-to-install anchors for applications under static loads. Key Features Available with carbon and stainless-steel pins Pin and head configuration designed...

Simpson Strong-Tie SSDWP212S305 QD 10 x 2-1/2-Inch WP T25 4.5M

The Deck-Drive DWP Wood SS screw is a powerful fastening solution for deck, dock and general exterior applications where extra corrosion protection is needed. With its specially designed...

Simpson T15N125SFN 1-1/4-Inch 15 Ga 33 Degree Finish 316SS Nails 4 M

1-1/4-Inch 15 Gauge 316 Stainless Steel DA Type Angle Finish Nail Key Features D-style head has greater bearing area to draw trim to the substrate Choose Type 316 stainless steel for seaside...

Simpson Strong-Tie XLSH34B1414-RP83 LG Shouldered Screws 418 PK

XLSH34B1414-RP83 #14x3/4 Hex Lg Shouldered ScrewsReplacement pack of Hex Lg Shoulder Screws for installation of CFS products InstallationUse the specified type and number of anchors.Use the...

Simpson Strong-Tie DIA62SS Drop-In Anchor 303 Stainless Steel 5/8-Inch 100 Pk

Drop-In anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Available in stainless steel (DIA) or short (DIAS) versions. Minimum...

Simpson Strong-Tie HSS2-2KT Double 2X Stud Shoe With Screws 40 Pk

The HSS is designed to reinforce notched, vertical studs in construction and is used to strengthen a wall stud that has a large hole drilled through it, typically to accommodate a plumbing waste...

Simpson THD50800H6SS Titen HD 1/2 x 8-Inch 316SS Screw Anchor 80 Pk

Drill it. Drive it. Forget it. Titen HD screw anchors are a trusted anchor solution because they offer the performance that specifiers need and the ease of installation that contractors demand...

Simpson THDB62600HMG - 5/8 x 6 Titen Hd Mech Galv Mechanical Anchor 40 Pk

The Titen HD threaded rod hanger is a high-strength screw anchor designed to suspend threaded rod from concrete slabs, beams or concrete over metal in order to hang pipes, cable trays and other...

Simpson Strong-Tie PSCL 15/32 15/32-Inch Plywood Sheathing Clip 4 M

The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8" gap to address shrinkage and...

Simpson Strong-Tie PSCL 3/8 3/8-Inch Plywood Sheathing Clip 4 M

The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8" gap to address shrinkage and...

Simpson Strong-Tie PSCL 5/8 5/8-Inch Plywood Sheathing Clip 4 M

The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8" gap to address shrinkage and...

Simpson Strong-Tie HUC210-2 2 x 10 Double Concealed Face Mount Hanger 25 Pk

The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing cleaner visible lines in exposed...

Simpson Strong-Tie LUS210-2 - 2 x 10 Double Shear Face Mount Hanger 50 Pk

The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist...

Simpson Strong-Tie LUS26-3 - 2 x 6 Triple Shear Face Mount Hanger 50 Pk

The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist...

Simpson Strong-Tie MUS26 2 x 6-Inch Face Mount Hanger 100 Pk

The MUS is designed for medium-load truss applications and features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer...

Simpson Strong-Tie CBSDQ158S #8 x 1-5/8 Quick Drive Collated Screw 1.5M

This screw is used for securing sheathing to cold-formed steel (recommended thicknesses: 16 and 18 ga.). Key Features Ribbed flat head with nibs for easy countersinking #2 undersized square...

Simpson Strong-Tie DIA37SS Drop-In Anchor 303 Stainless Steel 3/8-Inch 50 Pk

Drop-In anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Available in stainless steel (DIA) or short (DIAS) versions. Minimum...

Simpson Strong-Tie CD25114RC 1/4-Inch Rod Coupler Crimp Drive 500 Pk

The crimp anchor is an easy-to-install expansion anchor for use in concrete and grout-filled block. The pre-formed curvature along the shaft creates an expansion mechanism that secures the anchor...

Simpson Strong-Tie N10HDGPT3000 10D .148x1-1/2-In HDG 33Deg Paper 3 M

Strong-Drive 33° SCN SMOOTH-SHANK CONNECTOR Nail Key Features 33° collation angle Full round head Smooth shank Head ID stamp Compatible Tools Bostitch® MCN150 (up to 1 1⁄2"),...

Simpson SDWH27800G-RP1 SDWH HDG .270 x 8-Inch Flag 25 Pk

The SDWH Timber-Hex HDG screw is a 0.276"-diameter hot-dip galvanized screw suitable for marine and coastal applications. The SDWH Timber-Hex HDG screw has a SawTooth™ point and...

Simpson Strong-Tie LUS24 - 2 x 4 Double Shear Face Mount Hanger 100 Pk

The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist...

Simpson Strong-Tie LUS24 - 2 x 4 Double Shear Face Mount Hanger 400 Pk

The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist...

Simpson Strong-Tie LUS26, 2 x 6 Double Shear Face Mount Hangers 100 Pk

The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist...

Simpson Strong-Tie LUS26 - 2 x 6 Double Shear Face Mount Hanger 200 Pk

The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist...