CONNECTORS

Simpson H2.5ASS Hurricane Tie Stainless Steel 100 Pk

Simpson H2.5ASS Hurricane Tie Stainless Steel (100 Pack) The H2.5ASS single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift...

Simpson H2.5A Hurricane Tie 300 Pk

Simpson H2.5A Hurricane Rafter/Truss Tie is a single-sided hurricane tie designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical...

Simpson H2.5A Hurricane Tie 200 Pk

Simpson Strong-Tie H2.5A Hurricane Tie (200 Pack) The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads...

Simpson Strong-Tie ECCQ66SDS25 6 X 6 End Column Cap With Screws 3 Pk

Column caps provide a strong connection for column-beam combinations. This design uses Strong-Drive® SDS Heavy-Duty Connector screws to provide faster installation and provides a greater net section area of the column compared to bolts. The...

Simpson Strong-Tie ECCQ66SDS25 6 X 6 End Column Cap With Screws 2 Pk

Column caps provide a strong connection for column-beam combinations. This design uses Strong-Drive® SDS Heavy-Duty Connector screws to provide faster installation and provides a greater net section area of the column compared to bolts. The...

Simpson Strong-Tie ECCLR666 & ECCLL666 Column Cap L End Right & Left Shown 5Pair

ECCLR666 ECCLL666 Combo - Simpson Strong-Tie ECCLR666 & ECCLL666 Column Cap L End Right & Left Shown (5 Pairs) The ECCL is designed to provide strong column-to-beam connections in end-of-beam applications when two beams intersect in an...

Simpson Strong-Tie BTB Brick Tie 1M

Brick ties provide a connection between the wood structure and brick veneer. The new, high-performance BTH brick tie is a tested solution for connecting masonry veneer to wood structures across airspaces from 2" to 3", providing the flexibility needed...

Simpson Strong-Tie BCS2-2/4 2-2X4 Post Cap 40 Pk

Simpson BCS2-2/4 2-2X4 Post Cap (40 Pack) The BCS is designed to connect a multi-ply member beam to a post. The dimensions of this post cap accommodate the narrower width of multiple 2x members on top of the post. The BCS provides both lateral and uplift...

Simpson Strong-Tie APHH610 Ap Heavy Hanger 6 x 10-Inch 2Pk

Simpson APHH610 AP Heavy Hanger 6 x 10 Inch (2 Pack) to connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers...

Simpson Strong-Tie APHH46 Ap Heavy Hanger 4 x 6-Inch 4Pk

Simpson Strong-Tie APHH46 AP Heavy Hanger to connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install...

Simpson Strong-Tie ABA44Z 4 x 4 Adjustable Post Base ZMAX 10 Pk

Simpson ABA44Z 4 x 4 Adjustable Post Base ZMAX 10 Pack is designed to attach wooden posts to existing concrete. The built-in 1" standoff of this adjustable post base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the...

Simpson Strong-Tie ABA24-2Z 4 x 4 Adjustable Post Base ZMAX 20 Pk

The ABA is designed to attach wooden posts to existing concrete. The built-in 1" standoff of this adjustable post base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post...

Simpson Strong-Tie ABA44Z 4 x 4 Adjustable Post Base ZMAX 15 Pk

ABA44Z Post Base Simpson Strong-Tie 4x4 Adjustable Post Base ZMAX (15 Pack) is designed to attach wooden posts to existing concrete. The built-in 1" standoff of this adjustable post base helps to prevent rot at the end of the post. The ABA has a slotted...

Simpson Strong-Tie ABA44Z 4 x 4 Adjustable Post Base ZMAX 25 Pk

Simpson Post Base ABA44Z 4 x 4 Adjustable Post Base ZMAX (25 Pack) is designed to attach wooden posts to existing concrete. The built-in 1" standoff of this adjustable post base helps to prevent rot at the end of the post. The ABA has a slotted anchor...

Simpson Strong-Tie ABA44Z 4 x 4 Adjustable Post Base ZMAX 30 Pk

Simpson Strong-Tie ABA44Z 4 x 4 Post Base - 30 Pack is designed to attach wooden posts to existing concrete. The built-in 1" standoff of this adjustable post base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base...

Simpson ABA66Z 6 x 6 Adjustable Post Base ZMAX 10 Pk

6 x 6 Post Base Simpson Strong-Tie ABA66Z Adjustable ZMAX 10 Pack is designed to attach wooden posts to existing concrete. The built-in 1" standoff of this adjustable post base helps to prevent rot at the end of the post. The ABA has a slotted anchor...

Simpson ABA66Z 6 x 6 Adjustable Post Base ZMAX 4 Pk

Adjustable Post Base Simpson ABA66Z for 6 x 6 Posts ZMAX Galvanized (4 Pack) is designed to attach wooden posts to existing concrete. The built-in 1" standoff of this adjustable post base helps to prevent rot at the end of the post. The ABA has a slotted...

Simpson Strong-Tie ABU1010RZ 10 x 10 Rough Adjustable Post Base 2 Pk

True 10x10 Post Base ABU1010RZ Simpson Strong-Tie Rough Adjustable Post Base (2 Pack) is designed to attach wooden posts to existing concrete in high capacity applications. The built-in 1" standoff of this adjustable post base helps to prevent rot at the...

Simpson Strong-Tie ABU1010RZ 10 x 10 Rough Adjustable Post Base Single

The ABU1010RZ for true rough cut 10x10 posts is designed to attach wooden posts to existing concrete in high capacity applications. The built-in 1" standoff of this adjustable post base helps to prevent rot at the end of the post. The ABU has a slotted...

Simpson Strong-Tie ABU44SS 4 x 4 Adjustable Post Base Stainless Steel 2 Pk

Simpson ABU44SS 4 x 4 Adjustable Post Base Stainless Steel (2 Pack).  The ABU is designed to attach wooden posts to existing concrete in high capacity applications. The built-in 1" standoff of this adjustable post base helps to prevent rot at the...

Simpson Strong-Tie ABU1212Z 12x12 Adjustable Post Base ZMAX 2 Pk

12x12 Post Base ABU1212Z Simpson Strong-Tie Adjustable for 12 x 12 Posts ZMAX (2 Pack) The ABU is designed to attach wooden posts to existing concrete in high capacity applications. The built-in 1" standoff of this adjustable post base helps to prevent...

Simpson Strong-Tie ABU1212Z 12x12 Adjustable Post Base ZMAX Single

ABU1212Z Adjustable Post Base SIMPSON STRONG-TIE for 12x12 Posts ZMAX (Single) The ABU is designed to attach wooden posts to existing concrete in high capacity applications. The built-in 1" standoff of this adjustable post base helps to prevent rot at...

Simpson Strong-Tie APVB88R Ornamental Avant Post Base 8x8 Rough PC ZMAX

Simpson APVB88R Ornamental Avant Post Base - Outdoor Accents adjustable post bases secure the post or column to concrete and are perfect for outdoor projects, such as pergolas, patio covers and other top-supported structures. These post bases are part of...

Simpson Strong-Tie SUBH3.25-R150 STD Duty Bridge Clip 150 Pk

Simplified Design and Installation Through InnovationSimpson Strong-Tie SUBH and MSUBH wall stud bridging connectors for cold-formed steel (CFS) framing offer a compact profile that allows standard 1 5/8" studs to be sistered directly against...

Simpson Strong-Tie CCQ46SDS2.5 4 x 6 Column Cap With Screws 2 Pk

Simpson CCQ46SDS2.5 4x6 Column Cap With Screws (2 Pack) Strong-Tie Column Caps provide a strong connection for column-beam combinations. This design uses Strong-Drive® SDS Heavy-Duty Connector screws to provide faster installation and provides a...

Simpson Strong-Tie CBH2.37X9.75H-KT 2.37" X 9.75" CBH HDG Kit - Beam Hanger

Computer modeling and CNC manufacturing enables glulam to be delivered to the jobsite in precise lengths and with preinstalled concealed hangers. The CBH concealed beam hanger is specifically designed for such applications, and is installed with readily...

Simpson CCQM3.62-SDSHDG Hot-Dip Galvanized Column Cap for 3-5/8" Beam w/SDS 2Pk

Simpson CCQM3.62-SDSHDG Column Cap - Hot Dip Galvanized (2 Pack) The CCQM embedded column cap is designed for use in raised pier foundations and applications where heavy beams rest on concrete or concrete block columns. The heavy-gauge beam seat and...

Simpson CCQM3.62-SDSHDG Hot-Dip Galvanized Column Cap for 3-5/8" Beam w/SDS

Simpson's CCQM3.62-SDSHDG Hot-Dipped Galvanized Column Cap for 3-5/8" beams.  The CCQM embedded column cap is designed for use in raised pier foundations and applications where heavy beams rest on concrete or concrete block columns. The heavy-gauge...