Straps Clips and Ties

Simpson H1A Hurricane Tie Zinc Coated 100 Pk

Simpson H1A Hurricane Tie Zinc Coated (100 Pack) The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2x lumber. These U-shaped hurricane ties...

Simpson Strong-Tie H16-2 Hurricane Tie 25 Pk

The H16 is a high-capacity hurricane tie that connects trusses to the top of wall plates in wood framing walls. The presloped seat simplifies installation and improves performance. The long straps of the H16 increase versatility, making it suitable for...

Simpson Strong-Tie H14 Hurricane Tie 25 Pk

The H14 is designed for high uplift load resistance in wood construction. The embossments on the H14 add stiffness in crucial areas for improved performance. These U-shaped hurricane ties specifically designed for coastal conditions are the go-to tie...

Simpson Strong-Tie H10S Hurricane Tie Stud 25 Pk

The H10S holds the rafter or truss on both sides for higher uplift applications with wood, concrete or concrete masonry walls. The longer bottom strap extends down the wall for higher capacity. Installation is fast and easy with the Simpson...

Simpson Strong-Tie H10AZ Hurricane Tie ZMAX 50 Pk

The H10AZ series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson H10AR Hurricane Tie 50 Pk

Simpson H10AR Hurricane Tie (50 Pack) The H10AR series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster...

Simpson H10AR Hurricane Ties 125 Pk

Simpson H10AR Hurricane Ties (125 Pack) The H10AR series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster...

Simpson Strong-Tie H10A Hurricane Tie 75 Pk

Hurricane Tie - H10A Simpson Strong-Tie truss or rafter for high uplift applications (75 Pack) The Simpson H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved...

Simpson Strong-Tie H10A-2Z Hurricane Tie ZMAX 50 Pk

The H10A-2Z series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie H10A-2 Hurricane Tie 50 Pk

The H10A-2 series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie H10A Hurricane Tie 200 Pk

The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie H10A Hurricane Tie 150 Pk

Simpson Hurricane Ties H10A (150 Pack) The Simpson H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide...

Simpson Strong-Tie H10A Hurricane Tie 100 Pk

Simpson Strong-Tie H10A Hurricane Ties (100 Pack) are ideal for securing trusses and rafters in high-wind regions.  The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial...

Simpson Strong-Tie GCT-R50 Cable Tie Strap Holder With .125 Dia x 1 Pin 6 Pk

The GCT is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to secure zip ties to concrete. The versatile GCT assembly consists of a preassembled zip-tie holder attached to a 1" smooth-shank fastener. This tie-strap holder is...

Simpson Strong-Tie GCL75-R25 3/4 Conduit CLAMP With .125 Dia x 1 Length Pin 6 Pk

The GCL is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to secure conduit to concrete. The versatile GCL assembly consists of a smooth-shank fastener attached to a cold-formed steel clamp. This conduit clamp is for...

Simpson Strong-Tie GCL50-R50 1/2 Conduit CLAMP With .125 Dia x 1 Pin 6 Pk

The GCL is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to secure conduit to concrete. The versatile GCL assembly consists of a smooth-shank fastener attached to a cold-formed steel clamp. This conduit clamp is for...

Simpson Strong-Tie GCC75-R100 3/4 Conduit Clip With .125 Dia x 1 Length Pin 6 Pk

The GCC is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to secure 1/2", 3/4" or 1" conduit to concrete. The versatile GCC assembly consists of a smooth-shank fastener attached to a conduit clip. This conduit clip is for...

Simpson Strong-Tie GCC50-R100 1/2 Conduit Clip With .125 Dia x 1 Length Pin 6 Pk

The GCC is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to secure 1/2", 3/4" or 1" conduit to concrete. The versatile GCC assembly consists of a smooth-shank fastener attached to a conduit clip. This conduit clip is for...

Simpson Strong-Tie GCC100-R100 1-Inch Conduit Clip W/.125 x 1-Inch Pin 500 Pk

The GCC is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to secure 1/2", 3/4" or 1" conduit to concrete. The versatile GCC assembly consists of a smooth-shank fastener attached to a conduit clip. This conduit clip is for...

Simpson Strong-Tie GAC-R100 Angle Clip With .125 Dia x 1-Inch Length Pin 6 Pk

The GAC is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to attach ceiling wires to concrete. The versatile GAC assembly consists of a smooth-shank fastener attached to a 90° angle. This angle clip is for high-volume...

Simpson FGTRHR Face-Mount Girder Tiedown Retrofit Right Hip - Powder Coated

Simpson FGTRHR Face-Mount Girder Tiedown Retrofit Right Hip - Powder Coated The FGTRHR is a high-load girder tiedown for new or retrofit masonry applications. This face-mount girder tiedown is a non-pitch-specific girder tiedown that offers high...

Simpson FGTR Face-Mount Girder Tiedown Retrofit - Powder Coated

Simpson FGTR Face-Mount Girder Tiedown Retrofit - Powder coatedThe FGTR is a high-load girder tiedown for new or retrofit masonry applications. This face-mount girder tiedown is a non-pitch-specific girder tiedown that offers high uplift capacity. The...

Simpson Strong-Tie DTT2Z-R2 Deck Tension Tie ZMAX With 1-1/2-Inch Screws 8 Pk

DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load rated as a holdown for light-duty shearwalls and braced-wall panel applications. For...

Simpson DTT2SS Deck Tension Tie Stainless With 1.5-Inch Screws 4 Pack

The Simpson DTT2SS Deck Tension Tie Stainless With 1.5-Inch Screws (4 Pack) are a safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load rated as a holdown for...

Simpson Strong-Tie DTC 2-1/2 x 1-7/8 x 2-3/4 Roof Truss Clip 100 Pk

For alignment control between a roof truss and nonbearing walls; the 1 1/2" slot permits vertical truss chord movement when loads are applied. Material 18 gauge (43 mil) Finish Galvanized (G90) Installation Use all specified fasteners;...

Simpson Strong-Tie DSPZ Double Stud Plate Tie ZMAX 100 Pk

The DSP is a prebent strap designed to connect double studs to either top or bottom plates. This versatile double-stud-plate connector helps to create a continuous load path in uplift resistance. The DSP features a top flange that allows the plate to...

Simpson Strong-Tie DSP Double Stud Plate Tie 100 Pk

The DSP is a prebent strap designed to connect double studs to either top or bottom plates. This versatile double-stud-plate connector helps to create a continuous load path in uplift resistance. The DSP features a top flange that allows the plate to...

Simpson Strong-Tie DPT7Z 4 x 4 Deck Post Tie ZMAX 25 Pk

The DPTZ deck post tie products are used to attach 2x4 (DPT5Z) or 4x4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. Material 14 gauge Finish ZMAX® coating Installation Use specified HDG fasteners;...