SIMPSON STRONG-TIE

Simpson ECCLR464 4x6x4 End Column Cap Right Direction

Simpson ECCLR464 4x6x4 End Column Cap Right Direction - Gray Paint.  The ECCL is designed to provide strong column-to-beam connections in end-of-beam applications when two beams intersect in...

Simpson ECCLR666HDG and ECCLL666HDG Column Cap L End Right & Left Shown Pair

Simpson L Shaped column caps set includes ECCLR666HDG and ECCLL666HDG Hot Dipped Galvanized. The ECCL and ECCLR are designed to provide strong column-to-beam connections in end-of-beam applications...

Simpson ECCLRQ464SDS Column Cap L End Right Direction Shown

Simpson Strong-Tie ECCLRQ464SDS Column Cap L End - (Right Direction Shown)  The ECCLQ is designed to provide strong column-beam connections in end-of-beam applications when two beams intersect...

Simpson EIPX-EZ-RP20 E-Z Click Drill-In Corner Epoxy Injection Ports 100 Pk

The E-Z-Click injection system is composed of a specially designed fitting and ports that take the mess out of your repair project while allowing you to work faster. The E-Z-Click injection fitting...

Simpson EMN50 Epoxy Mixing Hi-Volume Nozzle For 22 Oz & 56 Oz Cartridges 10 Pk

A high-volume nozzle for 22 oz. and 56 oz. epoxy cartridges. Please Note: This product image may represent a range of products; it may not be an exact representation of the product purchased.  ...

Simpson ETB12 Nylon Brush 34 x 1-5/8-Inch 24 Pk

Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie SET-XP , AT-XP and...

Simpson ETB6 Nylon Brush 16 x 3/4-Inch 24 Pk

Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie SET-XP , AT-XP and...

Simpson ETS376 Screen Tube 6-Inch Long 60 Mesh Carbon Steel For 3/8 Rod 150 Pk

Screen tubes are used in hollow base material applications to contain adhesive around the anchor and prevent it from running into voids. Simpson Strong-Tie® screen tubes are...

Simpson H10AR Hurricane Tie 50 Pk

Simpson H10AR Hurricane Tie (50 Pack) The H10AR series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved...

Simpson H10AR Hurricane Ties 125 Pk

Simpson H10AR Hurricane Ties (125 Pack) The H10AR series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved...

Simpson H1A Hurricane Tie Zinc Coated 100 Pk

Simpson H1A Hurricane Tie Zinc Coated (100 Pack) The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed...

Simpson H1AZ Hurricane Tie ZMAX 100 Pk

Simpson H1AZ Hurricane Seismic Ties ZMAX (100 Pack) The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is...

Simpson H1AZ Hurricane Ties ZMAX 60 Pk

Simpson H1AZ Hurricane Ties (60 Pack) provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2x...

Simpson H2.5AZ Hurricane Tie ZMAX 100 Pk

Simpson H2.5AZ Hurricane Tie ZMAX Galvanized (100 Pack) The H2.5AZ single sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous...

Simpson H2.5AZ Hurricane Tie ZMAX 200 Pk

Simpson Strong Tie H2.5AZ Hurricane Ties (200 Pack) The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load...

Simpson H2.5AZ Hurricane Tie ZMAX 400 Pk

Simpson H2.5AZ Hurricane Rafter Ties ZMAX (400 Pack) The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous...

Simpson HD3B 2-1/2" x 8-5/8" Light Duty Bolted Holdown 12-Gauge 25 Pk

The HDB is designed to provide loads for intermediate-load-range shearwalls, braced-wall panels and lateral applications in wood construction. This bolted holdown is installed with bolts into studs...

Simpson HDU8-SDS2.5 16-5/8-Inch Predeflected Holdown With Screws 2 Pack

Simpson HDU8-SDS2.5 16-5/8-Inch Predeflected Holdown With Screws (2 Pack) The Simpson Strong-Tie HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications...

Simpson HELI37800A 304SS Heli-Tie Helical Tie 3/8 x 8 Inch 50 Pk

Simpson HELI37800A 304SS Heli-Tie Helical Tie 3/8 x 8 Inch (50 Pack)The Heli-Tie helical wall tie is a stainless-steel tie used to anchor building façades to structural members or to stabilize brick...

Simpson HGA10KT Hurricane Gusset Angle Bracket Tie Kit W/ Screws 60 Pack

Simpson Strong-Tie HGA10KT Hurricane Gusset Angle Bracket Tie Kit With Screws (60 Pack)The Simpson HGA is designed to secure the truss to the top plate in gable end truss connections and other...

Simpson HGA10KT Hurricane Gusset Tie With Screws 30 Pack

Simpson Strong-Tie HGA10KT Hurricane Ties With Screws (30 Pack)The Simpson HGA10KT hurricane gusset tie is designed to secure the truss to the top plate in gable end truss connections and other...

Simpson HGLTV5.511 5-1/4 x 11-7/8 Top Flange I-Joist Hanger

Simpson HGLTV5.511 5-1/4 x 11-7/8 Top Flange I-Joist HangerHGLTV hangers are designed for structural composite lumber header applications that require high loads. The top-flange nails are sized and...

Simpson HGLTV5.511 5-1/4 x 11-7/8 Top Flange I-Joist Hanger 2 Pk

Simpson Strong-Tie HGLTV5.511 5-1/4 x 11-7/8 Top Flange I-Joist Hanger (2 Pack)Simpson HGLTV I-Joist Hanger is designed for structural composite lumber header applications that require high loads...

Simpson HGLTV5.516 5-1/4 x 16 Top Flange I Joist Hanger 2 Pk

Simpson HGLTV5.516 Top Flange I Joist Hanger (2 Pack)HGLTV hangers are designed for structural composite lumber header applications that require high loads. The top-flange nails are sized and...

Simpson HGLTV5.516 5-1/4 x 16 Top Flange I-Joist Hanger

Simpson Strong-Tie HGLTV5.516 5-1/4 x 16 Top Flange I-Joist Hanger - Glulam Beam HangersThe Simpson HGLTV hangers are designed for structural composite lumber header applications that require high...

Simpson HGT-2 3-5/16-Inch Width Girder Tiedown

Simpson HGT-2 3-5/16-Inch Width Girder Tiedown.  The HGT is a girder tiedown for high-load, 2-, 3- or 4-ply truss applications. The HGT offers high uplift capacity for girders and can be...

Simpson HGUS410 Face Mount Hanger 12 Pk

Simpson HGUS410 Face Mount Hanger (12 Pack) The Simpson Strong-Tie HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing...

Simpson HGUS414 Face Mount Hanger 12 Pk

Simpson HGUS414 Heavy Face Mount Hanger (12 Pack) The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that...