Simpson Strong-Tie

Simpson Strong-Tie H14 Hurricane Tie 25 Pk

The H14 is designed for high uplift load resistance in wood construction. The embossments on the H14 add stiffness in crucial areas for improved performance. These U-shaped hurricane ties specifically designed for coastal conditions are the go-to tie...

Simpson Strong-Tie H10S Hurricane Tie Stud 25 Pk

The H10S holds the rafter or truss on both sides for higher uplift applications with wood, concrete or concrete masonry walls. The longer bottom strap extends down the wall for higher capacity. Installation is fast and easy with the Simpson...

Simpson Strong-Tie H10AZ Hurricane Tie ZMAX 50 Pk

The H10AZ series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie H10AR Hurricane Tie 50 Pk

The H10AR series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie H10AR Hurricane Tie 125 Pk

The H10AR series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie H10A Hurricane Tie 75 Pk

The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie H10A-2Z Hurricane Tie ZMAX 50 Pk

The H10A-2Z series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie H10A-2 Hurricane Tie 50 Pk

The H10A-2 series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie H10A Hurricane Tie 200 Pk

The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie H10A Hurricane Tie 150 Pk

The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie H10A Hurricane Tie 100 Pk

The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided...

Simpson Strong-Tie GWL-100 Lathing Washer 1-Inch Dia.

The GWL-100 lathing washer is used with the GCN-MEPMAGKT tool and attaches lath to the wall surface for overlaying scratch coats, brown coats and stucco. The washers are held onto the nose of the tool with the GMR-2 magnetic ring and are attached to the...

Simpson Strong-Tie GTS4-5075-R200 1/4 Thrd 1/2 Length Thrd 3/4 Length Shank 6 Pk

The GTS is a gas-actuated 1/4" threaded stud designed to fasten both permanent and temporary building components to concrete, with the ability to easily remove the attachments. The versatile GTS consists of a 1/2" x 1/4-20-threaded stud and a 3/4" x 0...

Simpson Strong-Tie GTH-R200 .125-Inch Dia. x 1-Inch Length Pin 6 Pk

The GTH is a gas-actuated top-hat pin designed to fasten building components, such as cold-formed steel framing members, to concrete. The versatile GTH consists of a 1" smooth-shank pin and aluminum top-hat washer for fast loading and centering of the...

Simpson Strong-Tie GFC34 1 - 34g Fuel Cell 144 Pk

Simpson Strong-Tie GFC34 34 Gram Fuel Cell The GFC34 fuel cell is designed to operate with the GCN-MEPMAGKT and with many major-brand gas-actuated concrete-nailer tools. The fuel cell provides 1,200 shots and can operate at temperatures between 20°...

Simpson Strong-Tie GDPSK-138KT .10 x 1-3/8 Pin Spiral Knurl, With Fuel Cell 5M

GDPSK gas pins are designed for attaching plywood and OSB to cold-formed-steel studs. The spiral knurl provides a positive lock and resists back-out. Installed with the GCN-MEPMAG, the GDPSK-138 gas pin provides faster installation and setup times, which...

Simpson Strong-Tie GDPS-75KT Step Shank 3/4-Inch Plus Fuel 5M

GDPS pins are designed to work in the GCN-MEPMAG gas-actuated nailer tool for installation into steel. The step-shank pin, with a smaller-diameter tip, facilitates easier penetration, while the larger-diameter upper shank provides more shear resistance...

Simpson Strong-Tie GDPS-50KT Step Shank 1/2-Inch Plus Fuel 5M

GDPS pins are designed to work in the GCN-MEPMAG gas-actuated nailer tool for installation into steel. The step-shank pin, with a smaller-diameter tip, facilitates easier penetration, while the larger-diameter upper shank provides more shear resistance...

Simpson Strong-Tie GDP-75KT 3/4-Inch Pin Plus Fuel Cell 5M

GDP concrete pins are designed to work with the GCN-MEPMAG gas-actuated concrete nailer as well as with most major-brand gas-actuated concrete-nailer tools. The patented 10-fastener strip is designed with break-away plastic. The pins are designed for use...

Simpson Strong-Tie GDP-50KT 1/2-Inch Pin Plus Fuel Cell 5M

GDP concrete pins are designed to work with the GCN-MEPMAG gas-actuated concrete nailer as well as with most major-brand gas-actuated concrete-nailer tools. The patented 10-fastener strip is designed with break-away plastic. The pins are designed for use...

Simpson Strong-Tie GDP-150KT 1-1/2-Inch Pin Plus Fuel Cell 5M

GDP concrete pins are designed to work with the GCN-MEPMAG gas-actuated concrete nailer as well as with most major-brand gas-actuated concrete-nailer tools. The patented 10-fastener strip is designed with break-away plastic. The pins are designed for use...

Simpson Strong-Tie GDP-125KT 1-1/4-Inch Pin Plus Fuel Cell 5M

GDP concrete pins are designed to work with the GCN-MEPMAG gas-actuated concrete nailer as well as with most major-brand gas-actuated concrete-nailer tools. The patented 10-fastener strip is designed with break-away plastic. The pins are designed for use...

Simpson Strong-Tie GDP-100KT 1-Inch Pin Plus Fuel Cell 5M

GDP concrete pins are designed to work with the GCN-MEPMAG gas-actuated concrete nailer as well as with most major-brand gas-actuated concrete-nailer tools. The patented 10-fastener strip is designed with break-away plastic. The pins are designed for use...

Simpson Strong-Tie GDP-100KT 1-Inch Pins Plus Fuel Cell 1M

GDP concrete pins are designed to work with the GCN-MEPMAG gas-actuated concrete nailer as well as with most major-brand gas-actuated concrete-nailer tools. The patented 10-fastener strip is designed with break-away plastic. The pins are designed for use...

Simpson Strong-Tie GCT-R50 Cable Tie Strap Holder With .125 Dia x 1 Pin 6 Pk

The GCT is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to secure zip ties to concrete. The versatile GCT assembly consists of a preassembled zip-tie holder attached to a 1" smooth-shank fastener. This tie-strap holder is...

Simpson Strong-Tie GCL75-R25 3/4 Conduit CLAMP With .125 Dia x 1 Length Pin 6 Pk

The GCL is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to secure conduit to concrete. The versatile GCL assembly consists of a smooth-shank fastener attached to a cold-formed steel clamp. This conduit clamp is for...

Simpson Strong-Tie GCL50-R50 1/2 Conduit CLAMP With .125 Dia x 1 Pin 6 Pk

The GCL is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to secure conduit to concrete. The versatile GCL assembly consists of a smooth-shank fastener attached to a cold-formed steel clamp. This conduit clamp is for...

Simpson Strong-Tie GCC75-R100 3/4 Conduit Clip With .125 Dia x 1 Length Pin 6 Pk

The GCC is a preassembled MEP (mechanical, electrical and plumbing) fastener designed to secure 1/2", 3/4" or 1" conduit to concrete. The versatile GCC assembly consists of a smooth-shank fastener attached to a conduit clip. This conduit clip is for...