FASTENERS

Simpson S10300DTB #10x3-Inch T25 17PT 6 Lobe Drive Bugle Wood Screw 1.5M

The stainless-steel Bugle-Head Wood screw provides superior corrosion resistance while fastening all types of wood decking, including cedar, redwood and preservative-treated woods (non-hardwood). The 6-lobe drive recess provides for a secure bit which...

Simpson S10250WPB DWP #10 2-1/2 Inch Flat T25 1750 Pack

Simpson S10250WPB DWP #10 2-1/2 Inch Flat T25 (1750 Pack)The Deck-Drive DWP Wood SS screw is a powerful fastening solution for deck, dock and general exterior applications where extra corrosion protection is needed. With its specially-designed...

Simpson Strong-Tie S10250DTB #10 2-1/2-Inch Bugle T25 17Pt 2M

The stainless-steel Bugle-Head Wood screw provides superior corrosion resistance while fastening all types of wood decking, including cedar, redwood and preservative-treated woods (non-hardwood). The 6-lobe drive recess provides for a secure bit which...

Simpson Trim Head Screw S08250WJI 8x2-1/2 305SS T20 Trim-Hd 6-Lobe Deck-Drive

Simpson Trim Head Screw S08250WJI 8x2-1/2 305SS T20 Trim-Hd 6-Lobe Deck-Drive Stainless Steel 305SS 2.1M Qty.  The Deck-Drive DWP Wood SS screw is a powerful fastening solution for deck, dock and general exterior applications where extra corrosion...

Simpson Strong-Tie RFB#5X5HDG 5/8-In Dia x 5-Inch Retro-Fit Bolt HDG 50 Pk

RFBs are pre-cut threaded rod, supplied with nut and washer. For use with Simpson Strong-Tie® adhesives. May be ordered in bulk without the nut and washer. Use with Simpson Strong-Tie adhesives to anchor into existing concrete and masonry...

Simpson Strong-Tie RFB#5X16HDG 5/8-In Dia x 16-In Retro-Fit Bolt HDG 25 Pk

RFBs are pre-cut threaded rod, supplied with nut and washer. For use with Simpson Strong-Tie® adhesives. May be ordered in bulk without the nut and washer. Use with Simpson Strong-Tie adhesives to anchor into existing concrete and masonry...

Simpson Strong-Tie PDPAT-62KP .157 x 5/8-Inch Knurled Tophat Pin 1M

Simpson Strong-Tie PDPAT-62KP .157 x 5/8-Inch Knurled Tophat Pin 1M.  The PDPAT is a hardened-steel, powder-actuated top-hat pin designed to fasten building components to concrete, steel and CMU. The PDPAT consists of a 0.300"-diameter head,...

Simpson N8HDGPT500 8d x 1-1/2-Inch HDG Nail 33 Deg Paper Collated 4000 Count

Simpson Paper Nails N8HDGPT500 8d x 1-1/2-Inch HDG Nail 33 Deg Paper Collated 4000 Count (8 Packs of 500)Strong-Drive 33° SCN SMOOTH-SHANK CONNECTOR NailKey Features33° collation angleFull round headSmooth shankHead ID stampCompatible...

Simpson N8HDGPT500 8d x 1-1/2-Inch HDG Nail 33 Deg Paper Tape 4 Pk

Simpson N8HDGPT500 8d x 1-1/2-Inch HDG Nail 33 Deg Paper Tape 2000 Count (4 Pack of 500)Strong-Drive 33° SCN SMOOTH-SHANK CONNECTOR NailKey Features33° collation angleFull round headSmooth shankHead ID stampCompatible ToolsBostitch®MCN150 (up to 1 1⁄2"),...

Simpson N16HDGPT500 16D .162 x 2-1/2" HDG 33 Degree Paper Nails 2M

Simpson Strong-Tie N16HDGPT500 16D .162 x 2-1/2" HDG 33 Degree Paper Nails 2M (2,000 Qty)Strong-Drive 33° SCN SMOOTH-SHANK CONNECTOR NailKey Features33° collation angleFull round headSmooth shankHead ID stampCompatible ToolsBostitch®MCN150 (up to 1...

Simpson Strong-Tie N16 .162 x 2-1/2-Inch Bright Nail 50 Pk

Simpson Strong-Tie Connector nails are the best choice for Simpson Strong-Tie connectors. Applications For Simpson Strong-Tie connectors Please Note: This product image may represent a range of products; it may not be an exact...

Simpson Strong-Tie N10HDGPT3000 10D .148x1-1/2-In HDG 33Deg Paper 3 M

Strong-Drive 33° SCN SMOOTH-SHANK CONNECTOR Nail Key Features 33° collation angle Full round head Smooth shank Head ID stamp Compatible Tools Bostitch® MCN150 (up to 1 1⁄2"), MCN250, F33PT Grip-Rite® GR150 (up to 1...

Simpson Strong-Tie N10DHDGPT500 10d x 2-1/2-Inch HDG Nail 33 Deg Papertape 4 Pk

Strong-Drive 33° SCN SMOOTH-SHANK CONNECTOR Nail Key Features 33° collation angle Full round head Smooth shank Head ID stamp Compatible Tools Bostitch® MCN150 (up to 1 1⁄2"), MCN250, F33PT Grip-Rite® GR150 (up to 1...

Simpson Strong-Tie N10DHDGPT2500 10D .148x2-1/2-In HDG 33Deg Paper 2.5M

Strong-Drive 33° SCN SMOOTH-SHANK CONNECTOR Nail Key Features 33° collation angle Full round head Smooth shank Head ID stamp Compatible Tools Bostitch® MCN150 (up to 1 1⁄2"), MCN250, F33PT Grip-Rite® GR150 (up to 1...

Simpson Strong-Tie N10 10d x 1-1/2-Inch HDG Nail 50 Pk

Simpson Strong-Tie Connector nails are the best choice for Simpson Strong-Tie connectors. Applications For Simpson Strong-Tie connectors Please Note: This product image may represent a range of products; it may not be an exact...

Simpson Strong-Tie MTW45-8-R10 Angled Washer 45-Degree 200 Pk

Inclined screws greatly increase the strength and stiffness of mass timber connections. The Simpson Strong-Tie MTW45-8 is designed for use with a wide variety of connection plates and 8 mm-diameter Simpson Strong-Tie Strong-Drive SDCF Timber-CF screws...

Simpson MTH114S #7 x 1-1/4-Inch #2 Square Thread Underlay Gray 2.5M

The MTH Underlayment screw is designed for fast and secure underlayment to subfloor installations. Unlike nails, the MTH Underlayment screw has an intricate thread pattern designed to prevent squeaking by holding underlayment tight to the subfloor and...

Simpson Strong-Tie LBPS 5/8Z 5/8-Inch Bolt Dia 3 x 3 Bearing Plate ZMAX 50 Pk

The LBP is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This light bearing plate works by transferring concentrated compressive forces between two structural elements. The...

Simpson Strong-Tie LBPS5/8 5/8-Inch Bolt Dia 3 x 3 Bearing Plate. 50 Pk

The LBPS is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This light bearing plate features a slotted hole that allows for adjustability to account for bolts that are not...

Simpson Strong-Tie LBPS 5/8 5/8-Inch Bolt Dia 3 x 3 Bearing Plate. 100 Pk

The LBPS is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This light bearing plate features a slotted hole that allows for adjustability to account for bolts that are not...

Simpson Strong-Tie LBPS1/2Z 1/2-Inch Bolt Dia 3 x 3 Bearing Plate ZMAX 50 Pk

The LBP is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This light bearing plate works by transferring concentrated compressive forces between two structural elements. The...

Simpson Strong-Tie LBPS1/2 1/2-Inch Bolt Dia 3 x 3 Bearing Plate. 50 Pk

The LBPS is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This light bearing plate features a slotted hole that allows for adjustability to account for bolts that are not...

Simpson Strong-Tie LBPS 1/2 1/2-Inch Bolt Dia 3 x 3 Bearing Plate. 100 Pk

The LBPS is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This light bearing plate features a slotted hole that allows for adjustability to account for bolts that are not...

Simpson Strong-Tie LBP5/8 5/8-Inch Bolt Dia 2 x 2 Bearing Plate. 100 Pk

The LBP is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This light bearing plate works by transferring concentrated compressive forces between two structural elements. The...

Simpson Strong-Tie GWL-100 Lathing Washer 1-Inch Dia.

The GWL-100 lathing washer is used with the GCN-MEPMAGKT tool and attaches lath to the wall surface for overlaying scratch coats, brown coats and stucco. The washers are held onto the nose of the tool with the GMR-2 magnetic ring and are attached to the...

Simpson Strong-Tie GTS4-5075-R200 1/4 Thrd 1/2 Length Thrd 3/4 Length Shank 6 Pk

The GTS is a gas-actuated 1/4" threaded stud designed to fasten both permanent and temporary building components to concrete, with the ability to easily remove the attachments. The versatile GTS consists of a 1/2" x 1/4-20-threaded stud and a 3/4" x 0...

Simpson Strong-Tie GDPS-75KT Step Shank 3/4-Inch Plus Fuel 5M

GDPS pins are designed to work in the GCN-MEPMAG gas-actuated nailer tool for installation into steel. The step-shank pin, with a smaller-diameter tip, facilitates easier penetration, while the larger-diameter upper shank provides more shear resistance...

Simpson Strong-Tie GDP-75KT 3/4-Inch Pin Plus Fuel Cell 5M

GDP concrete pins are designed to work with the GCN-MEPMAG gas-actuated concrete nailer as well as with most major-brand gas-actuated concrete-nailer tools. The patented 10-fastener strip is designed with break-away plastic. The pins are designed for use...