Bolts-Nuts-Washers

Simpson Strong-Tie STN22-R8 Outdoor Accents Hex-Head Washer (80 Pieces)

The Outdoor Accents hex-head washer provides the decorative appearance of a bolted connection. Its patented design provides an easier and significantly faster installation time than through-bolting. The hex-head washer is designed to help fasten...

Simpson SSTB24 5/8 Inch Diameter 25 Inch Length Anchor Bolt - 10 Pack

Simpson Anchor Bolts - SSTB24, 5/8" Diameter, 25" Length (10 Pack) The SSTB Anchor Bolt is designed for maximum performance as an anchor bolt for holdowns and Simpson Strong-Tie® Strong-Wall® shearwalls. Extensive testing has been done...

Simpson Strong-Tie RFB#5X5HDG 5/8-In Dia x 5-Inch Retro-Fit Bolt HDG 20 Pk

RFBs are pre-cut threaded rod, supplied with nut and washer. For use with Simpson Strong-Tie® adhesives. May be ordered in bulk without the nut and washer. Use with Simpson Strong-Tie adhesives to anchor into existing concrete and masonry...

Simpson Strong-Tie RFB#5X16HDG 5/8-In Dia x 16-In Retro-Fit Bolt HDG 20 Pk

RFBs are pre-cut threaded rod, supplied with nut and washer. For use with Simpson Strong-Tie® adhesives. May be ordered in bulk without the nut and washer. Use with Simpson Strong-Tie adhesives to anchor into existing concrete and masonry...

Simpson Strong-Tie PINWP-300W 3-Inch LV Insul Pin W/White Plastic Washer 500 Pk

The PINWP is a powder-actuated washered pin designed to fasten rigid insulation board to building structures. The PINWP consists of a 0.300″-headed fastener with a pre-mounted 1 3/8″ flat plastic washer. The PINWP is for high-volume...

Simpson Strong-Tie PINWP-300W 3-Inch LV Insul Pin With White Plastic Washer 1M

The PINWP is a powder-actuated washered pin designed to fasten rigid insulation board to building structures. The PINWP consists of a 0.300″-headed fastener with a pre-mounted 1 3/8″ flat plastic washer. The PINWP is for high-volume...

Simpson Strong-Tie PINWP-250W 2-1/2-Inch LV Insul Pin With Plastic Washer 500 Pk

The PINWP is a powder-actuated washered pin designed to fasten rigid insulation board to building structures. The PINWP consists of a 0.300″-headed fastener with a pre-mounted 1 3/8″ flat plastic washer. The PINWP is for high-volume...

Simpson Strong-Tie PINWP-250W 2-1/2-Inch LV Insul Pin With Plastic Washer 1M

The PINWP is a powder-actuated washered pin designed to fasten rigid insulation board to building structures. The PINWP consists of a 0.300″-headed fastener with a pre-mounted 1 3/8″ flat plastic washer. The PINWP is for high-volume...

Simpson Strong-Tie PINWP-175W 1-3/4-Inch LV Insul Pin White Plast Washer 500 Pk

The PINWP is a powder-actuated washered pin designed to fasten rigid insulation board to building structures. The PINWP consists of a 0.300″-headed fastener with a pre-mounted 1 3/8″ flat plastic washer. The PINWP is for high-volume...

Simpson Strong-Tie PINWP-175W 1-3/4-Inch LV Insul Pin White Plast Washer 1M

The PINWP is a powder-actuated washered pin designed to fasten rigid insulation board to building structures. The PINWP consists of a 0.300″-headed fastener with a pre-mounted 1 3/8″ flat plastic washer. The PINWP is for high-volume...

Simpson Strong-Tie PINWP-150W 1-1/2-Inch LV Insul Pin With Plastic Washer 500 Pk

The PINWP is a powder-actuated washered pin designed to fasten rigid insulation board to building structures. The PINWP consists of a 0.300″-headed fastener with a pre-mounted 1 3/8″ flat plastic washer. The PINWP is for high-volume...

Simpson Strong-Tie PINWP-150W 1-1/2 Inch LV Insulated Pin With Plastic Washer 1M (1,000 Count)

Simpson Strong-Tie PINWP-150W 1-1/2 Inch LV Insulated Pin With Plastic Washer 1M (1,000 Count)The PINWP is a powder-actuated washered pin designed to fasten rigid insulation board to building structures. The PINWP consists of a 0.300″-headed fastener...

Simpson Strong-Tie PINW-300 3-Inch LV Insul Pin With Metal Washer 500 Pk

The PINW is a powder-actuated washered pin designed to fasten rigid insulation board to building structures. The PINW consists of a 0.300″-headed fastener with a pre-mounted 1 7/16″ flat metal washer. The PINW is for high-volume...

Simpson Strong-Tie PINW-250 2-1/2-Inch LV Insul Pin With Metal Washer 500 Pk

The PINW is a powder-actuated washered pin designed to fasten rigid insulation board to building structures. The PINW consists of a 0.300″-headed fastener with a pre-mounted 1 7/16″ flat metal washer. The PINW is for high-volume...

Simpson Strong-Tie BP 1/2" Hole Bolt Dia 3 x 3 Bearing Plate 50 Pk

Simpson BP 1/2" Hole Bolt Diameter 3x3 Bearing Plate (50 Pack) Simpson BP 3x3 bearing plate is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by...

Simpson Strong-Tie BP1/2 1/2-Inch Bolt Dia 2 x 2 Bearing Plate 250 Pk

Simpson BP 2x2 bearing plate is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two...

Simpson APDMW56 Decorative Mission Washer Powder Coat Over ZMAX 50 Pk

The Simpson Outdoor Accents APDMW56 decorative washer installs easily with the Outdoor Accents structural wood screw and hex-head washer and can be used in a variety of wood-to-wood connections. Key FeaturesZMAX® galvanization with a black...

Simpson APDMW56 Decorative Mission Washer Powder Coat Over ZMAX 40 Pk

Simpson Strong Tie APDMW56 Washer Black Powder Coat Outdoor Accents decorative washer installs easily with the Outdoor Accents structural wood screw and hex-head washer and can be used in a variety of wood-to-wood connections. Key...

Simpson APDMW56 Decorative Mission Washer Powder Coat Over ZMAX 30 Pk

Decorative Mission Washer Simpson APDMW56 Powder Coat Over ZMAX (30 Pack) installs easily with the Outdoor Accents structural wood screw and hex-head washer and can be used in a variety of wood-to-wood connections. Key...

Simpson APDMW56 Decorative Mission Washer Powder Coat Over ZMAX 24 Pk

APDMW56 Decorative Mission Washer Powder Coat Over ZMAX Simpson Strong-Tie (24 Pack) installs easily with the Outdoor Accents structural wood screw and hex-head washer and can be used in a variety of wood-to-wood connections. Key...

Simpson Strong-Tie BP 1/2-3 1/2-Inch Bolt Dia 3 x 3 Bearing Plate 100 Pk

The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is...

Simpson Strong-Tie STN22-R24 Outdoor Accents Hex-Head Washer 144 Pk

The Outdoor Accents hex-head washer provides the decorative appearance of a bolted connection. Its patented design provides an easier and significantly faster installation time than through-bolting. The hex-head washer is designed to help fasten...

Simpson Strong-Tie SSTB16 5/8-Inch Dia 17-5/8-Inch Anchor Bolt 25 Pk

The SSTB anchor bolt is designed for maximum performance as an anchor bolt for holdowns and Simpson Strong-Tie® Strong-Wall® shearwalls. Extensive testing has been done to determine the design load capacity of the SSTB when installed...

Simpson Strong-Tie SB1X30 1-Inch Dia 30-Inch Anchor Bolt 4 Pk

The SB anchor bolt offers an anchorage solution for our holdowns that call for a 5/8"-diameter, a 7/8"-diameter and a 1"-diameter anchor. SB anchor bolts are code listed by ICC-ES under the 2012 / 2015 / 2018 / 2021 IBC and IRC. Key Features ...

Simpson Strong-Tie RFB#5X5HDG 5/8-In Dia x 5-Inch Retro-Fit Bolt HDG 50 Pk

RFBs are pre-cut threaded rod, supplied with nut and washer. For use with Simpson Strong-Tie® adhesives. May be ordered in bulk without the nut and washer. Use with Simpson Strong-Tie adhesives to anchor into existing concrete and masonry...

Simpson Strong-Tie RFB#5X16HDG 5/8-In Dia x 16-In Retro-Fit Bolt HDG 25 Pk

RFBs are pre-cut threaded rod, supplied with nut and washer. For use with Simpson Strong-Tie® adhesives. May be ordered in bulk without the nut and washer. Use with Simpson Strong-Tie adhesives to anchor into existing concrete and masonry...

Simpson Strong-Tie MTW45-8-R10 Angled Washer 45-Degree 200 Pack

Simpson Strong-Tie MTW45-8-R10 Angled Washer 45-Degree (200 Pack) Inclined screws greatly increase the strength and stiffness of mass timber connections. The Simpson Strong-TieMTW45-8 is designed for use with a wide variety of connection plates and...

Simpson MTW45-8-R10 45 Degree Angled Washer 10 Pack

Simpson MTW45-8-R10 45 Degree Angled Washer (10 Pack)   Inclined screws greatly increase the strength and stiffness of mass timber connections. The Simpson Strong-TieMTW45-8 is designed for use with a wide variety of connection plates and 8...