Simpson Strong Tie

Simpson Strong-Tie MDPL050DIAS 1/2x13-Inch Stop Bit 20 Pk

This fixed-depth SDS-plus shank drill bit properly prepares the anchor site for the Simpson Strong-Tie Drop-In anchors in normal-weight, sand-lightweight and hollow-core concrete. Please Note: This product image may represent a range of products;...

Simpson Strong-Tie MASBZ - Mudsill Anchor Concrete Masonry ZMAX 100 Pk

The MASB is a mudsill anchor designed specifically to anchor a mudsill to concrete block foundations or walls. The unique design eliminates problems associated with misplaced anchor bolts. The MASB easily installs into wet concrete-grouted CMU block...

Simpson Strong-Tie MASB - Mudsill Anchor For Standard Forms ZMAX 100 Pk

The MASB is a mudsill anchor designed specifically to anchor a mudsill to concrete block foundations or walls. The unique design eliminates problems associated with misplaced anchor bolts. The MASB easily installs into wet concrete-grouted CMU block...

Simpson Strong-Tie MASAP - Mudsill Anchor For Standard Forms 100 Pk

The MASAP is a mudsill anchor for panel form that provides a time-saving alternative to anchor bolts. This mudsill anchor eliminates the need for 3" square plate washers for seismic design and, in some cases, has allowable loads that meet or exceed the...

Simpson Strong-Tie MASA Mudsill Anchor For Standard Forms 50 Pk

Simpson MASA mudsill anchor provides a time-saving alternative to anchor bolts. This mudsill anchor eliminates the need for 3″ square plate washers for seismic design and, in some cases, has allowable loads that meet or exceed the parallel- and...

Simpson Strong-Tie MASA - Mudsill Anchor For Standard Forms 200 Pk

The MASA is a mudsill anchor that provides a time-saving alternative to anchor bolts. This mudsill anchor eliminates the need for 3″ square plate washers for seismic design and, in some cases, has allowable loads that meet or exceed the parallel-...

Simpson Strong-Tie MASA - Mudsill Anchor For Standard Forms 100 Pk

The MASA is a mudsill anchor that provides a time-saving alternative to anchor bolts. This mudsill anchor eliminates the need for 3″ square plate washers for seismic design and, in some cases, has allowable loads that meet or exceed the parallel-...

Simpson Strong-Tie MAB15Z - 2 x 4 / 2 x 6 Mudsill Anchor ZMAX 200 Pk

The MAB is a mudsill anchor with the design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB can eliminate certain problems associated with misplaced anchor bolts. Key...

Simpson Strong-Tie LUS44Z 4 x 4 Double Shear Face Mount Hanger ZMAX 25 Pk

Simpson LUS44Z Face Mount Hanger is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This...

Simpson LUS28SS 2x8 Face Mount Joist Hangers 316SS 25 Pk

Simpson LUS28SS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer...

Simpson LUS210SS 2x10 Double Shear Face Mount Hanger Stainless Steel 5 Pack

LUS210SS 2x10 Double Shear Face Mount Hanger Stainless Steel (5 Pack) The Simpson Strong-Tie LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load...

Simpson Strong-Tie LU28R-18 - 2 x 8 Rough Face Mount Hanger 18 Ga. 25 Pk

Simpson LU28R is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value...

Simpson Strong-Tie LU28, 2 x 8 Face Mount Hangers 100 Pk

Simpson LU28 face mount hangers are designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical...

Simpson Strong-Tie LTP4 3 x 4-1/4-Inch Lateral Tie Plate 200 Pk

Simpson LTP4 lateral tie plate is designed to transfer shear forces for plate-to-rim board or blocking connections. This lateral tie plate can be securely installed over plywood sheathing or directly to the framing members. The LTP features...

Simpson Strong-Tie LTB20 Bridging 200 Pk

Simpson LTB20 bridging provides bracing between floor joists as a critical contribution to the structural strength of a floor. Installed in pairs, this light tension-type bridging keeps joists in place and prevents them from rotating while distributing...

Simpson Strong-Tie LSTA36 1-1/4 x 36 Light Strap Tie 40 Pk

The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2x members. Key Features Load-rated,...

Simpson ICFVL-W To Connect Wood Ledger To ICFVL 15 Pk

Simpson ICFVL-W To Connect Wood Ledger To ICFVL (15 Pack) The Simpson Strong-Tie ICFVL-W wood ledger connector system is engineered to solve the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls. The ICFVL is designed to...

Simpson Strong-Tie ICFVL-CW To Connect Composite Wood Ledger To ICFVL. 15 Pk

Simpson ICFVL-CW composite wood ledger connector system is engineered to solve the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls. The ICFVL is designed to provide both vertical and lateral in-plane performance. The...

Simpson Strong-Tie HRS416Z 16-Inch Heavy Strap Z-MAX 10 Pk

The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2x members. The HRS416Z is designed for 4x members. These straps are load-rated, precut straps designed for quick...

Simpson Strong-Tie HGUS7.25/14 Double Shear SCL Hanger Single

The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. Value-engineered, the HGUS is...

Simpson Strong-Tie HGT-4 6-9/16-Inch Width Girder Tiedown Single

The HGT is a girder tiedown for high-load, 2-, 3- or 4-ply truss applications. The HGT offers high uplift capacity for girders and can be installed on trusses and beams with top chord slopes up to 8/12. The HGT can be anchored down into place directly...

Simpson Strong-Tie HETA20 16-Inch With 4-Inch Embedded Truss Anchor 50 Pk

Simpson HETA truss anchor provides an engineered method to attach roof trusses securely to concrete and masonry walls. This heavy embedded truss anchor features staggered nail patterns to strengthen uplift resistance and can be used in pairs on single-...

Simpson Strong-Tie HETA16 12-Inch With 4-Inch Embedded Truss Anchor 50 Pk

Simpson HETA truss anchor provides an engineered method to attach roof trusses securely to concrete and masonry walls. This heavy embedded truss anchor features staggered nail patterns to strengthen uplift resistance and can be used in pairs on single-...

Simpson Strong-Tie HDU5-SDS2.5 13-3/16" Predeflected Hold Down w/SDS 3 Pk

The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS Heavy-Duty Connector screws which install easily, reduce fastener slip and provide a...

Simpson HDU4-SDS2.5 10-15/16-Inch Predeflected Holdown With Screws 3 Pk

Simpson HDU4-SDS2.5 Holdown With Screws (3 Pack) The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS Heavy-Duty Connector screws which install...

Simpson Strong-Tie HDU14-SDS2.5 25-11/16-Inch Predeflected Holdown With Screws

Simpson HDU14-SDS2.5 Predeflected Holdown Brace is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS Heavy-Duty Connector screws which install easily,...

Simpson Strong-Tie HDU11-SDS2.5HDG Hot-Dip Galv Preselected Hold Down Single

The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS Heavy-Duty Connector screws which install easily, reduce fastener slip and provide a...

Simpson H2.5ASS Hurricane Ties 50 Pk

Simpson Strong-Tie H2.5ASS 316SS Stainless Steel Hurricane Ties (50 Pack) Single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and...