Simpson Strong Tie

Simpson Strong-Tie RPS22 1-1/2-Inch x 22-5/16-Inch Retro Plate Strap 50 Pk

Simpson RPS22 meets IBC, IRC and City of Los Angeles code requirements for HVAC and pipes in walls. Finish Galvanized. Some products available in ZMAX coating Please Note: This product image may represent a range of products; it may not be an...

Simpson Strong-Tie MTS12 12-Inch Medium Twist Strap 200 Pk

The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two...

Simpson Strong-Tie ML24Z 2 x 4-Inch Medium L Angle ZMAX 60 Pk

Simpson ML24Z L angle combines strength and versatility through the use of Strong-Drive® SDS Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation...

Simpson Strong-Tie META16 - 12-Inch With 4-Inch Embed Truss Anchor 200 Pk

The Simpson META16 provides an engineered method to attach roof trusses securely to concrete and masonry walls. This medium embedded truss anchor features staggered nail patterns to strengthen uplift resistance and can be used in pairs on single- and...

Simpson Strong-Tie LUS44Z - 4 x 4 Double Shear Face Mount Hanger ZMAX 50 Pk

The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails,...

Simpson Strong-Tie LUS210SS 2 x 10 Double Shear Face Mount Hanger Stainless 50 Pack

Simpson Strong Tie LUS210SS 2 x 10 Double Shear Face Mount Hanger Stainless (50 Pack) The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load...

Simpson LUS210SS Joist Hanger 2x10 Double Shear Face Mount Hanger Stainless 25 Pack

Simpson LUS210SS Joist Hanger 2x10 Double Shear Face Mount Hanger Stainless (25 Pack) is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two...

Simpson LUS210SS 316SS 2x10 Inch Joist Hanger 10 Pack

LUS210SS Stainless Steel Joist Hanger (10 Pack) The Simpson LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist...

Simpson Strong-Tie LU28R-18 - 2 x 8 Rough Face Mount Hanger 18 Ga. 50 Pk

The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value...

Simpson Strong-Tie LU28R-18 - 2 x 8 Rough Face Mount Hanger 18 Ga. 100 Pk

The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value...

Simpson Strong-Tie LU28 - 2 x 8 Face Mount Hanger 200 Pk

The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value...

Simpson Strong-Tie LSTA18 18-Inch Strap Tie 200 Pk

Simpson LSTA18 strap tie is designed to resist tension loads in wood-to-wood applications. This light strap tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2x members. Key Features...

Simpson Strong-Tie LSTA12, 12-Inch Strap Ties 100 Pk

Simpson LSTA12 Strap Ties are designed to resist tension loads in wood-to-wood applications. This light strap tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2x members. Key...

Simpson Strong-Tie ICFVL-W To Connect Wood Ledger To ICFVL 60 Pk

Simpson ICFVL-W wood ledger connector system is engineered to solve the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls. The ICFVL is designed to provide both vertical and lateral in-plane performance. The system...

Simpson Strong-Tie ICFVL-W To Connect Wood Ledger To ICFVL. 45 Pk

Simpson ICFVL-W wood ledger connector system is engineered to solve the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls. The ICFVL is designed to provide both vertical and lateral in-plane performance. The system...

Simpson Strong-Tie ICFVL-W To Connect Wood Ledger To ICFVL 30 Pk

Simpson ICFVL-W wood ledger connector system is engineered to solve the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls. The ICFVL is designed to provide both vertical and lateral in-plane performance. The system...

Simpson Strong-Tie ICFVL-CW To Connect Composite Wood Ledger To ICFVL 60 Pk

Simpson ICFVL wood ledger connector system is engineered to solve the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls. The ICFVL is designed to provide both vertical and lateral in-plane performance. The system...

Simpson Strong-Tie ICFVL-CW To Connect Composite Wood Ledger To ICFVL 45 Pk

Simpson ICFVL wood ledger connector system is engineered to solve the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls. The ICFVL is designed to provide both vertical and lateral in-plane performance. The system...

Simpson Strong-Tie ICFVL-CW To Connect Composite Wood Ledger To ICFVL 30 Pk

Simpson ICFVL wood ledger connector system is engineered to solve the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls. The ICFVL is designed to provide both vertical and lateral in-plane performance. The system...

Simpson Strong-Tie HTP37Z 3 x 7-Inch Heavy Tie Plate ZMAX 50 Pk

The HTP is designed to resist tension when installed on the side of 2x4 or larger members. This heavy tie plate is ideal for a variety of applications including connecting two members end-to-end or attaching multiple members together. The HTP can be...

Simpson Strong-Tie HRS416Z 16-Inch Heavy Strap ZMAX 100 Pk

Simpson HRS416Z Heavy Strap is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2x members. The HRS416Z is designed for 4x members. These straps are load-rated, precut straps designed...

Simpson HDU4-SDS2.5 10-15/16 Inch Predeflected Holdown With Screws 5 Pk

Simpson HDU4-SDS2.5 10-15/16 Holdown With Screws (5 Pack) The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS Heavy-Duty Connector screws which...

Simpson HDU4-SDS2.5 10-15/16-Inch Predeflected Holdown With Screws 4 Pk

HDU4-SDS2.5 Simpson 10-15/16-Inch Predeflected Holdown With Screws (4 Pack) Simpson HDU4 is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS Heavy-Duty...

Simpson Strong-Tie HDU4-SDS2.5 10-15/16 Predeflected Holdown With Screws 15 Pk

The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS Heavy-Duty Connector screws which install easily, reduce fastener slip and provide a...

Simpson HDU4-SDS2.5 10-15/16-Inch Predeflected Holdown With Screws 10 Pk

Simpson HDU4-SDS2.5 10-15/16-Inch Predeflected Hold Down With Screws (10 Pack) The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS Heavy-Duty...

Simpson Strong-Tie HDU14-SDS2.5 25-11/16 Predeflected Holdown With Screws 4 Pk

The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS Heavy-Duty Connector screws which install easily, reduce fastener slip and provide a...

Simpson Strong-Tie HDU14-SDS2.5 25-11/16 Predeflected Holdown With Screws 2 Pk

The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS Heavy-Duty Connector screws which install easily, reduce fastener slip and provide a...

Simpson H2.5ASS Hurricane Tie 75 Pk

Simpson H2.5ASS Hurricane Tie (75 Pack) Single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical...