SIMPSON STRONG-TIE

Simpson Strong-Tie GDP-50KT 1/2-Inch Pin Plus Fuel Cell 5M

GDP concrete pins are designed to work with the GCN-MEPMAG gas-actuated concrete nailer as well as with most major-brand gas-actuated concrete-nailer tools. The patented 10-fastener strip is designed...

Simpson Strong-Tie GDP-75KT 3/4-Inch Pin Plus Fuel Cell 5M

GDP concrete pins are designed to work with the GCN-MEPMAG gas-actuated concrete nailer as well as with most major-brand gas-actuated concrete-nailer tools. The patented 10-fastener strip is designed...

Simpson Strong-Tie GDPS-50KT Step Shank 1/2-Inch Plus Fuel 5M

GDPS pins are designed to work in the GCN-MEPMAG gas-actuated nailer tool for installation into steel. The step-shank pin, with a smaller-diameter tip, facilitates easier penetration, while the...

Simpson Strong-Tie GDPS-75KT Step Shank 3/4-Inch Plus Fuel 5M

GDPS pins are designed to work in the GCN-MEPMAG gas-actuated nailer tool for installation into steel. The step-shank pin, with a smaller-diameter tip, facilitates easier penetration, while the...

Simpson Strong-Tie GDPSK-138KT .10 x 1-3/8 Pin Spiral Knurl, With Fuel Cell 5M

GDPSK gas pins are designed for attaching plywood and OSB to cold-formed-steel studs. The spiral knurl provides a positive lock and resists back-out. Installed with the GCN-MEPMAG, the GDPSK-138 gas...

Simpson Strong-Tie GFC34 1 - 34g Fuel Cell 144 Pk

Simpson Strong-Tie GFC34 34 Gram Fuel Cell The GFC34 fuel cell is designed to operate with the GCN-MEPMAGKT and with many major-brand gas-actuated concrete-nailer tools. The fuel cell provides 1,200...

Simpson Strong-Tie GTH-R200 .125-Inch Dia. x 1-Inch Length Pin 6 Pk

The GTH is a gas-actuated top-hat pin designed to fasten building components, such as cold-formed steel framing members, to concrete. The versatile GTH consists of a 1" smooth-shank pin and...

Simpson Strong-Tie GTS4-5075-R200 1/4 Thrd 1/2 Length Thrd 3/4 Length Shank 6 Pk

The GTS is a gas-actuated 1/4" threaded stud designed to fasten both permanent and temporary building components to concrete, with the ability to easily remove the attachments. The versatile GTS...

Simpson Strong-Tie GWL-100 Lathing Washer 1-Inch Dia.

The GWL-100 lathing washer is used with the GCN-MEPMAGKT tool and attaches lath to the wall surface for overlaying scratch coats, brown coats and stucco. The washers are held onto the nose of the...

Simpson Strong-Tie H10A Hurricane Tie 100 Pk

Simpson Strong-Tie H10A Hurricane Ties (100 Pack) are ideal for securing trusses and rafters in high-wind regions.  The H10A series holds the rafter or truss on both sides for high uplift...

Simpson Strong-Tie H10A Hurricane Tie 150 Pk

Simpson Hurricane Ties H10A (150 Pack) The Simpson H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved...

Simpson Strong-Tie H10A Hurricane Tie 200 Pk

The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties...

Simpson Strong-Tie H10A Hurricane Tie 75 Pk

Hurricane Tie - H10A Simpson Strong-Tie truss or rafter for high uplift applications (75 Pack) The Simpson H10A series holds the rafter or truss on both sides for high uplift applications with...

Simpson Strong-Tie H10A-2 Hurricane Tie 50 Pk

The H10A-2 series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties...

Simpson Strong-Tie H10A-2Z Hurricane Tie ZMAX 50 Pk

The H10A-2Z series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties...

Simpson Strong-Tie H10AZ Hurricane Tie ZMAX 50 Pk

The H10AZ series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties...

Simpson Strong-Tie H10S Hurricane Tie Stud 25 Pk

The H10S holds the rafter or truss on both sides for higher uplift applications with wood, concrete or concrete masonry walls. The longer bottom strap extends down the wall for higher capacity...

Simpson Strong-Tie H14 Hurricane Tie 25 Pk

The H14 is designed for high uplift load resistance in wood construction. The embossments on the H14 add stiffness in crucial areas for improved performance. These U-shaped hurricane ties...

Simpson Strong-Tie H16-2 Hurricane Tie 25 Pk

The H16 is a high-capacity hurricane tie that connects trusses to the top of wall plates in wood framing walls. The presloped seat simplifies installation and improves performance. The long straps...

Simpson Strong-Tie H2.5T Hurricane Tie 400 Pk

The H2.5T single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H2.5T resists both lateral and uplift...

Simpson Strong-Tie H2A Hurricane Tie 100 Pk

The H2A single-sided hurricane tie makes a direct connection between the rafter or truss, the top plates and the wall studs. A value-added solution for high-wind applications, it is designed to...

Simpson Strong-Tie H2AZ Hurricane Tie Connector 100 Pk

The H2A single-sided hurricane tie makes a direct connection between the rafter or truss, the top plates and the wall studs. A value-added solution for high-wind applications, it is designed to...

Simpson Strong-Tie H3 Hurricane Tie 400 Pk

Simpson Strong-Tie H3 single sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H3 resists both lateral and...

Simpson Strong-Tie H3SS Hurricane Tie 316 Stainless Steel 100 Pk

The H3 single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H3 resists both lateral and uplift loads...

Simpson Strong-Tie H3Z Hurricane Tie ZMAX 100 Pk

The H3 single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H3 resists both lateral and uplift loads...

Simpson Strong-Tie H6Z Hurricane Tie ZMAX 50 Pk

The H6 single-sided hurricane tie is designed to resist moderate to high uplift loads at the stud-to-double-top-plate and the rim-joist-to-stud connections. The length of the tie makes it ideal for...

Simpson Strong-Tie H7Z Hurricane Tie ZMAX 50 Pk

The H7Z is a hurricane tie designed for moderate-to-high uplift loads in wood and CFS construction. As part of a continuous load path, the H7Z ties the rafter or truss to both the top plate and the...

Simpson Strong-Tie H8 Hurricane Tie 100 Pk

Simpson H8 Hurricane Tie (100 Pack) single-sided ties is designed to resist moderate loads at the top of a wall connection. Provides a connection as part of a continuous load path to resist wind and...